Neri's Other Ruby Glass

 

Rhodochrosite, from the Sweet Home Mine, Colorado.

Antonio Neri is widely recognized for publishing a recipe for the coveted and difficult gold ruby glass. "Rubino," as it is sometimes called, achieves a deep ruby red color utilizing only powdered metallic gold as a colorant. Perhaps because of the notoriety of that prescription, Neri’s other transparent red glass is hardly known. His recipe #120 describes a deep red pigment based on manganese. Today manganese takes its place on the periodic table as an elemental metal, but in the early seventeenth century it had not been isolated from its mineral ore. What Neri calls manganese was actually its oxide, which occurs as a black powdery material. Its effects in glass have been known since the early Egyptian dynasties and before that, as a pottery glaze. By itself the oxide produces a tint often likened to violet or amethyst. In small quantities, it is used to neutralize the slight green tint introduced by iron impurities in clear glass. 

To make his ruby red pigment, Neri starts with high quality manganese oxide from Piedmont and processes it through several alchemical operations. I will not be delving into the chemistry in detail here, suffice it to say that he comes close to synthesizing a highly unstable explosive, the likes of which was not "discovered" for another two centuries. It is a striking illustration of how technical ability can be in place long before theory catches up, in this case thankfully so. 

The pigment he did succeed in making is for now a mystery. Manganese carbonate, which can form ruby red crystals might fit the bill, except that it decomposes at the temperatures of molten glass. It occurs in nature as the mineral rhodochrosite as seen above. [1] Below is Neri's recipe for "Transparent Red in Glass" from his 1612 book L’Arte Vetraria. Most of the terminology is straightforward, with the exception of a few terms. 'Porphyry' is a hard granite used for grinding stones. 'Reverberation' is indirect radiation in a furnace, where the heat is reflected from the walls. 'Sublimation' is when certain materials vaporize directly from a solid form and recondense without passing through a liquid phase.

Grind manganese impalpably, then mix it with an equal amount of refined saltpeter and put it into a clay pan set to the fire, reverberating and calcining it for 24 hours. Take it then and wash its saltiness away with warm common water. Once separated from the salt, let it dry. It will be a ruby-red color. With this, mix an equal weight of sal ammoniac and grind them together over porphyry stone with distilled vinegar, which they will soak up. Leave this alone to dry and then put it in a retort with a wide body and a long neck. Heat it in sand for 12 hours to sublimate. 

Then break up the glass. Take all the deposits in the neck and body of the retort and mix it with the residual remains in the bottom. Weigh it and combine it all with as much sal ammoniac as was lost in the first sublimation. Grind everything together over the porphyry stone, with distilled vinegar for it to soak up. Then put it in a retort to sublimate as above. Repeat this sublimation, in this manner, many times until in the end, the manganese will all remain fusible in the bottom. 

This is the medicine that tints crystal and pastes in a diaphanous red color and a ruby red as well. Use 20 oz of this medicine per ounce of cristallo or glass, but more or less may be used accordingly to govern the color. The manganese should be the very best from Piedmont, so that it will have the effect of tinting the glass a beautiful ruby color and be a sight of wonderment.

[1] Manganese carbonate, MnCO3.

Sal Ammoniac

 

Ammoniac crystals, Fan-yagnobskoe coal mine, Tadjikistan,

Photo (c) A. A. Evseev.

Here we will examine "sal ammoniac," a common alchemical ingredient used by Antonio Neri in many of his early seventeenth century preparations. In its pure form, it is a colorless crystalline material and is known to chemists as ammonium chloride. It does occur as a (rare) natural mineral, but it was also manufactured as early as the thirteenth century, as noted by alchemist Albertus Magnus in his De alchymia.[1] Neither he nor Neri provides a recipe for sal ammoniac, but other sources indicate that it was made by allowing urine to putrefy with common salt. French investigators documented another method used in Egypt in the eighteenth century. This scheme involved burning the dung of animals who fed on spring grasses and then sublimating the ammoniac out of the resulting soot. Sublimation occurs when a heated material goes directly from a solid to a gaseous state without ever becoming liquid. Sal ammoniac has this property; when heated it turns to a gas and upon cooling, turns back to a solid.
The usefulness of sal ammoniac in alchemy stems from the fact that when dissolved in water, which it does easily, it immediately dissociates into equal parts of ammonia and hydrochloric acid, which in turn will dissolve some metals, including tin, zinc, iron and (reluctantly) lead. Its most famous use was as an additive to the stronger acid aqua fortis (nitric acid). Together the two formed aqua regis which was strong enough to dissolve gold. At the time that Neri was working, the only known way to dissolve the most 'noble' of metals (gold) was with the 'king' of acids (aqua regis). Neri puts this knowledge to use in his recipe for ruby-red colored glass made with pure gold. His description is light on details, but he does clearly direct the reader to dissolve the precious metal in aqua regis, then gently evaporate away the acid to obtain the red pigment.

Elsewhere in Neri's glassmaking book, L'Arte Vetraria,[2] he uses sal ammoniac in the production of "alemagna blue" paint and in the tinting of natural rock crystal. 

Another of Neri's creations requiring sal ammoniac was Chalcedony glass. It had swirls of every color the glassmaker could produce. He achieved this feat by making extensive use of aqua regis to dissolve a long list of metals. He then gently evaporated off the acid, leaving ultrafine powdered metals, which he added as pigments to the glass melt. 

With this powder, I made a chalcedony in a glass furnace in Antwerp that was then run by a most courteous gentleman; Mr. Filippo Gridolfi. This chalcedony gave rise to work so nice and graceful, that it emulated true oriental agate, and in beauty and delightful colors by far exceeded it.

Today, chemical factories produce vast quantities of the materials used by Neri in his glassmaking exploits and in far higher purities. Having unlimited quantities of every conceivable chemical compound at our fingertips makes it difficult to appreciate the physical labor involved by seventeenth century alchemists, both in the preparation of the glass and in the production of the individual ingredients. The chalcedony glass recipe cited above must have taken workers many, many hours to produce and must have cost a small fortune. 

[1] Magnus 1958.
[2] Neri 1612.
[3] Glauber and others used the term 'sal ammoniac' to describe a related chemical (NH4)2SO4. When mixed with aqua fortis this forms a nitric-sulfuric acid solution, which does not form aqua regis, and does not dissolve gold.

*This post first appeared here 22 August 2014.

Neri's Other Ruby Glass

Rhodochrosite, from the Sweet Home Mine, Colorado.

Antonio Neri is widely recognized for publishing a recipe for the coveted and difficult gold ruby glass. "Rubino," as it is sometimes called, achieves a deep ruby red color utilizing only powdered metallic gold as a colorant. Perhaps because of the notoriety of that prescription, Neri’s other transparent red glass is hardly known. His recipe #120 describes a deep red pigment based on manganese. Today manganese takes its place on the periodic table as an elemental metal, but in the early seventeenth century it had not been isolated from its mineral ore. What Neri calls manganese was actually its oxide, which occurs as a black powdery material. Its effects in glass have been known since the early Egyptian dynasties and before that, as a pottery glaze. By itself the oxide produces a tint often likened to violet or amethyst. In small quantities, it is used to neutralize the slight green tint introduced by iron impurities in clear glass. 

To make his ruby red pigment, Neri starts with high quality manganese oxide from Piedmont and processes it through several alchemical operations. I will not be delving into the chemistry in detail here, suffice it to say that he comes close to synthesizing a highly unstable explosive, the likes of which was not "discovered" for another two centuries. It is a striking illustration of how technical ability can be in place long before theory catches up, in this case thankfully so. 

The pigment he did succeed in making is for now a mystery. Manganese carbonate, which can form ruby red crystals might fit the bill, except that it decomposes at the temperatures of molten glass. It occurs in nature as the mineral rhodochrosite as seen above. [1] Below is Neri's recipe for "Transparent Red in Glass" from his 1612 book L’Arte Vetraria. Most of the terminology is straightforward, with the exception of a few terms. 'Porphyry' is a hard granite used for grinding stones. 'Reverberation' is indirect radiation in a furnace, where the heat is reflected from the walls. 'Sublimation' is when certain materials vaporize directly from a solid form and recondense without passing through a liquid phase.

Grind manganese impalpably, then mix it with an equal amount of refined saltpeter and put it into a clay pan set to the fire, reverberating and calcining it for 24 hours. Take it then and wash its saltiness away with warm common water. Once separated from the salt, let it dry. It will be a ruby-red color. With this, mix an equal weight of sal ammoniac and grind them together over porphyry stone with distilled vinegar, which they will soak up. Leave this alone to dry and then put it in a retort with a wide body and a long neck. Heat it in sand for 12 hours to sublimate. 

Then break up the glass. Take all the deposits in the neck and body of the retort and mix it with the residual remains in the bottom. Weigh it and combine it all with as much sal ammoniac as was lost in the first sublimation. Grind everything together over the porphyry stone, with distilled vinegar for it to soak up. Then put it in a retort to sublimate as above. Repeat this sublimation, in this manner, many times until in the end, the manganese will all remain fusible in the bottom. 

This is the medicine that tints crystal and pastes in a diaphanous red color and a ruby red as well. Use 20 oz of this medicine per ounce of cristallo or glass, but more or less may be used accordingly to govern the color. The manganese should be the very best from Piedmont, so that it will have the effect of tinting the glass a beautiful ruby color and be a sight of wonderment.

[1] Manganese carbonate, MnCO3.

Sal Ammoniac

Ammoniac crystals, Fan-yagnobskoe coal mine, Tadjikistan,

Photo (c) A. A. Evseev.

Here we will examine "sal ammoniac," a common alchemical ingredient used by Antonio Neri in many of his early seventeenth century preparations. In its pure form, it is a colorless crystalline material and is known to chemists as ammonium chloride. It does occur as a (rare) natural mineral, but it was also manufactured as early as the thirteenth century, as noted by alchemist Albertus Magnus in his De alchymia.[1] Neither he nor Neri provides a recipe for sal ammoniac, but other sources indicate that it was made by allowing urine to putrefy with common salt. French investigators documented another method used in Egypt in the eighteenth century. This scheme involved burning the dung of animals who fed on spring grasses and then sublimating the ammoniac out of the resulting soot. Sublimation occurs when a heated material goes directly from a solid to a gaseous state without ever becoming liquid. Sal ammoniac has this property; when heated it turns to a gas and upon cooling, turns back to a solid.
The usefulness of sal ammoniac in alchemy stems from the fact that when dissolved in water, which it does easily, it immediately dissociates into equal parts of ammonia and hydrochloric acid, which in turn will dissolve some metals, including tin, zinc, iron and (reluctantly) lead. Its most famous use was as an additive to the stronger acid aqua fortis (nitric acid). Together the two formed aqua regis which was strong enough to dissolve gold. At the time that Neri was working, the only known way to dissolve the most 'noble' of metals (gold) was with the 'king' of acids (aqua regis). Neri puts this knowledge to use in his recipe for ruby-red colored glass made with pure gold. His description is light on details, but he does clearly direct the reader to dissolve the precious metal in aqua regis, then gently evaporate away the acid to obtain the red pigment.

Elsewhere in Neri's glassmaking book, L'Arte Vetraria,[2] he uses sal ammoniac in the production of "alemagna blue" paint and in the tinting of natural rock crystal. 

Another of Neri's creations requiring sal ammoniac was Chalcedony glass. It had swirls of every color the glassmaker could produce. He achieved this feat by making extensive use of aqua regis to dissolve a long list of metals. He then gently evaporated off the acid, leaving ultrafine powdered metals, which he added as pigments to the glass melt. 

With this powder, I made a chalcedony in a glass furnace in Antwerp that was then run by a most courteous gentleman; Mr. Filippo Gridolfi. This chalcedony gave rise to work so nice and graceful, that it emulated true oriental agate, and in beauty and delightful colors by far exceeded it.

Today, chemical factories produce vast quantities of the materials used by Neri in his glassmaking exploits and in far higher purities. Having unlimited quantities of every conceivable chemical compound at our fingertips makes it difficult to appreciate the physical labor involved by seventeenth century alchemists, both in the preparation of the glass and in the production of the individual ingredients. The chalcedony glass recipe cited above must have taken workers many, many hours to produce and must have cost a small fortune. 

[1] Magnus 1958.
[2] Neri 1612.
[3] Glauber and others used the term 'sal ammoniac' to describe a related chemical (NH4)2SO4. When mixed with aqua fortis this forms a nitric-sulfuric acid solution, which does not form aqua regis, and does not dissolve gold.

*This post first appeared here 22 August 2014.

Neri's Other Ruby Glass

Rhodochrosite, from the Sweet Home Mine, Colorado.

Antonio Neri is widely recognized for publishing a recipe for the coveted and difficult gold ruby glass. "Rubino," as it is sometimes called, achieves a deep ruby red color utilizing only powdered metallic gold as a colorant. Perhaps because of the notoriety of that prescription, Neri’s other transparent red glass is hardly known. His recipe #120 describes a deep red pigment based on manganese. Today manganese takes its place on the periodic table as an elemental metal, but in the early seventeenth century it had not been isolated from its mineral ore. What Neri calls manganese was actually its oxide, which occurs as a black powdery material. Its effects in glass have been known since the early Egyptian dynasties and before that, as a pottery glaze. By itself the oxide produces a tint often likened to violet or amethyst. In small quantities, it is used to neutralize the slight green tint introduced by iron impurities in clear glass. 

To make his ruby red pigment, Neri starts with high quality manganese oxide from Piedmont and processes it through several alchemical operations. I will not be delving into the chemistry in detail here, suffice it to say that he comes close to synthesizing a highly unstable explosive, the likes of which was not "discovered" for another two centuries. It is a striking illustration of how technical ability can be in place long before theory catches up, in this case thankfully so. 

The pigment he did succeed in making is for now a mystery. Manganese carbonate, which can form ruby red crystals might fit the bill, except that it decomposes at the temperatures of molten glass. It occurs in nature as the mineral rhodochrosite as seen above. [1] Below is Neri's recipe for "Transparent Red in Glass" from his 1612 book L’Arte Vetraria. Most of the terminology is straightforward, with the exception of a few terms. 'Porphyry' is a hard granite used for grinding stones. 'Reverberation' is indirect radiation in a furnace, where the heat is reflected from the walls. 'Sublimation' is when certain materials vaporize directly from a solid form and recondense without passing through a liquid phase.

Grind manganese impalpably, then mix it with an equal amount of refined saltpeter and put it into a clay pan set to the fire, reverberating and calcining it for 24 hours. Take it then and wash its saltiness away with warm common water. Once separated from the salt, let it dry. It will be a ruby-red color. With this, mix an equal weight of sal ammoniac and grind them together over porphyry stone with distilled vinegar, which they will soak up. Leave this alone to dry and then put it in a retort with a wide body and a long neck. Heat it in sand for 12 hours to sublimate. 

Then break up the glass. Take all the deposits in the neck and body of the retort and mix it with the residual remains in the bottom. Weigh it and combine it all with as much sal ammoniac as was lost in the first sublimation. Grind everything together over the porphyry stone, with distilled vinegar for it to soak up. Then put it in a retort to sublimate as above. Repeat this sublimation, in this manner, many times until in the end, the manganese will all remain fusible in the bottom. 

This is the medicine that tints crystal and pastes in a diaphanous red color and a ruby red as well. Use 20 oz of this medicine per ounce of cristallo or glass, but more or less may be used accordingly to govern the color. The manganese should be the very best from Piedmont, so that it will have the effect of tinting the glass a beautiful ruby color and be a sight of wonderment.

[1] Manganese carbonate, MnCO3.

Sal Ammoniac

Ammoniac crystals, Fan-yagnobskoe coal mine, Tadjikistan,

Photo (c) A. A. Evseev.

Here we will examine "sal ammoniac," a common alchemical ingredient used by Antonio Neri in many of his early seventeenth century preparations. In its pure form, it is a colorless crystalline material and is known to chemists as ammonium chloride. It does occur as a (rare) natural mineral, but it was also manufactured as early as the thirteenth century, as noted by alchemist Albertus Magnus in his De alchymia.[1] Neither he nor Neri provides a recipe for sal ammoniac, but other sources indicate that it was made by allowing urine to putrefy with common salt. French investigators documented another method used in Egypt in the eighteenth century. This scheme involved burning the dung of animals who fed on spring grasses and then sublimating the ammoniac out of the resulting soot. Sublimation occurs when a heated material goes directly from a solid to a gaseous state without ever becoming liquid. Sal ammoniac has this property; when heated it turns to a gas and upon cooling, turns back to a solid.
The usefulness of sal ammoniac in alchemy stems from the fact that when dissolved in water, which it does easily, it immediately dissociates into equal parts of ammonia and hydrochloric acid, which in turn will dissolve some metals, including tin, zinc, iron and (reluctantly) lead. Its most famous use was as an additive to the stronger acid aqua fortis (nitric acid). Together the two formed aqua regis which was strong enough to dissolve gold. At the time that Neri was working, the only known way to dissolve the most 'noble' of metals (gold) was with the 'king' of acids (aqua regis). Neri puts this knowledge to use in his recipe for ruby-red colored glass made with pure gold. His description is light on details, but he does clearly direct the reader to dissolve the precious metal in aqua regis, then gently evaporate away the acid to obtain the red pigment.

Elsewhere in Neri's glassmaking book, L'Arte Vetraria,[2] he uses sal ammoniac in the production of "alemagna blue" paint and in the tinting of natural rock crystal. 

Another of Neri's creations requiring sal ammoniac was Chalcedony glass. It had swirls of every color the glassmaker could produce. He achieved this feat by making extensive use of aqua regis to dissolve a long list of metals. He then gently evaporated off the acid, leaving ultrafine powdered metals, which he added as pigments to the glass melt. 

With this powder, I made a chalcedony in a glass furnace in Antwerp that was then run by a most courteous gentleman; Mr. Filippo Gridolfi. This chalcedony gave rise to work so nice and graceful, that it emulated true oriental agate, and in beauty and delightful colors by far exceeded it.

Today, chemical factories produce vast quantities of the materials used by Neri in his glassmaking exploits and in far higher purities. Having unlimited quantities of every conceivable chemical compound at our fingertips makes it difficult to appreciate the physical labor involved by seventeenth century alchemists, both in the preparation of the glass and in the production of the individual ingredients. The chalcedony glass recipe cited above must have taken workers many, many hours to produce and must have cost a small fortune. 

[1] Magnus 1958.
[2] Neri 1612.
[3] Glauber and others used the term 'sal ammoniac' to describe a related chemical (NH4)2SO4. When mixed with aqua fortis this forms a nitric-sulfuric acid solution, which does not form aqua regis, and does not dissolve gold.

*This post first appeared here 22 August 2014.

Neri's Other Ruby Glass

Rhodochrosite, from the Sweet Home Mine, Colorado.

Antonio Neri is widely recognized for publishing a recipe for the coveted and difficult gold ruby glass. "Rubino," as it is sometimes called, achieves a deep ruby red color utilizing only powdered metallic gold as a colorant. Perhaps because of the notoriety of that prescription, Neri’s other transparent red glass is hardly known. His recipe #120 describes a deep red pigment based on manganese. Today manganese takes its place on the periodic table as an elemental metal, but in the early seventeenth century it had not been isolated from its mineral ore. What Neri calls manganese was actually its oxide, which occurs as a black powdery material. Its effects in glass have been known since the early Egyptian dynasties and before that, as a pottery glaze. By itself the oxide produces a tint often likened to violet or amethyst. In small quantities, it is used to neutralize the slight green tint introduced by iron impurities in clear glass. 

To make his ruby red pigment, Neri starts with high quality manganese oxide from Piedmont and processes it through several alchemical operations. I will not be delving into the chemistry in detail here, suffice it to say that he comes close to synthesizing a highly unstable explosive, the likes of which was not "discovered" for another two centuries. It is a striking illustration of how technical ability can be in place long before theory catches up, in this case thankfully so. 

The pigment he did succeed in making is for now a mystery. Manganese carbonate, which can form ruby red crystals might fit the bill, except that it decomposes at the temperatures of molten glass. It occurs in nature as the mineral rhodochrosite as seen above. [1] Below is Neri's recipe for "Transparent Red in Glass" from his 1612 book L’Arte Vetraria. Most of the terminology is straightforward, with the exception of a few terms. 'Porphyry' is a hard granite used for grinding stones. 'Reverberation' is indirect radiation in a furnace, where the heat is reflected from the walls. 'Sublimation' is when certain materials vaporize directly from a solid form and recondense without passing through a liquid phase.

Grind manganese impalpably, then mix it with an equal amount of refined saltpeter and put it into a clay pan set to the fire, reverberating and calcining it for 24 hours. Take it then and wash its saltiness away with warm common water. Once separated from the salt, let it dry. It will be a ruby-red color. With this, mix an equal weight of sal ammoniac and grind them together over porphyry stone with distilled vinegar, which they will soak up. Leave this alone to dry and then put it in a retort with a wide body and a long neck. Heat it in sand for 12 hours to sublimate. 

Then break up the glass. Take all the deposits in the neck and body of the retort and mix it with the residual remains in the bottom. Weigh it and combine it all with as much sal ammoniac as was lost in the first sublimation. Grind everything together over the porphyry stone, with distilled vinegar for it to soak up. Then put it in a retort to sublimate as above. Repeat this sublimation, in this manner, many times until in the end, the manganese will all remain fusible in the bottom. 

This is the medicine that tints crystal and pastes in a diaphanous red color and a ruby red as well. Use 20 oz of this medicine per ounce of cristallo or glass, but more or less may be used accordingly to govern the color. The manganese should be the very best from Piedmont, so that it will have the effect of tinting the glass a beautiful ruby color and be a sight of wonderment.

[1] Manganese carbonate, MnCO3.

Sal Ammoniac

Ammoniac crystals, Fan-yagnobskoe coal mine, Tadjikistan,

Photo (c) A. A. Evseev.

Here we will examine "sal ammoniac," a common alchemical ingredient used by Antonio Neri in many of his early seventeenth century preparations. In its pure form, it is a colorless crystalline material and is known to chemists as ammonium chloride. It does occur as a (rare) natural mineral, but it was also manufactured as early as the thirteenth century, as noted by alchemist Albertus Magnus in his De alchymia.[1] Neither he nor Neri provides a recipe for sal ammoniac, but other sources indicate that it was made by allowing urine to putrefy with common salt. French investigators documented another method used in Egypt in the eighteenth century. This scheme involved burning the dung of animals who fed on spring grasses and then sublimating the ammoniac out of the resulting soot. Sublimation occurs when a heated material goes directly from a solid to a gaseous state without ever becoming liquid. Sal ammoniac has this property; when heated it turns to a gas and upon cooling, turns back to a solid.
The usefulness of sal ammoniac in alchemy stems from the fact that when dissolved in water, which it does easily, it immediately dissociates into equal parts of ammonia and hydrochloric acid, which in turn will dissolve some metals, including tin, zinc, iron and (reluctantly) lead. Its most famous use was as an additive to the stronger acid aqua fortis (nitric acid). Together the two formed aqua regis which was strong enough to dissolve gold. At the time that Neri was working, the only known way to dissolve the most 'noble' of metals (gold) was with the 'king' of acids (aqua regis). Neri puts this knowledge to use in his recipe for ruby-red colored glass made with pure gold. His description is light on details, but he does clearly direct the reader to dissolve the precious metal in aqua regis, then gently evaporate away the acid to obtain the red pigment.

Elsewhere in Neri's glassmaking book, L'Arte Vetraria,[2] he uses sal ammoniac in the production of "alemagna blue" paint and in the tinting of natural rock crystal. 

Another of Neri's creations requiring sal ammoniac was Chalcedony glass. It had swirls of every color the glassmaker could produce. He achieved this feat by making extensive use of aqua regis to dissolve a long list of metals. He then gently evaporated off the acid, leaving ultrafine powdered metals, which he added as pigments to the glass melt. 

With this powder, I made a chalcedony in a glass furnace in Antwerp that was then run by a most courteous gentleman; Mr. Filippo Gridolfi. This chalcedony gave rise to work so nice and graceful, that it emulated true oriental agate, and in beauty and delightful colors by far exceeded it.

Today, chemical factories produce vast quantities of the materials used by Neri in his glassmaking exploits and in far higher purities. Having unlimited quantities of every conceivable chemical compound at our fingertips makes it difficult to appreciate the physical labor involved by seventeenth century alchemists, both in the preparation of the glass and in the production of the individual ingredients. The chalcedony glass recipe cited above must have taken workers many, many hours to produce and must have cost a small fortune. 

[1] Magnus 1958.
[2] Neri 1612.
[3] Glauber and others used the term 'sal ammoniac' to describe a related chemical (NH4)2SO4. When mixed with aqua fortis this forms a nitric-sulfuric acid solution, which does not form aqua regis, and does not dissolve gold.

*This post first appeared here 22 August 2014.

Neri's Other Ruby Glass

Rhodochrosite, from the Sweet Home Mine, Colorado.

Antonio Neri is widely recognized for publishing a recipe for the coveted and difficult gold ruby glass. "Rubino," as it is sometimes called, achieves a deep ruby red color utilizing only powdered metallic gold as a colorant. Perhaps because of the notoriety of that prescription, Neri’s other transparent red glass is hardly known. His recipe #120 describes a deep red pigment based on manganese. Today manganese takes its place on the periodic table as an elemental metal, but in the early seventeenth century it had not been isolated from its mineral ore. What Neri calls manganese was actually its oxide, which occurs as a black powdery material. Its effects in glass have been known since the early Egyptian dynasties and before that, as a pottery glaze. By itself the oxide produces a tint often likened to violet or amethyst. In small quantities, it is used to neutralize the slight green tint introduced by iron impurities in clear glass. 

To make his ruby red pigment, Neri starts with high quality manganese oxide from Piedmont and processes it through several alchemical operations. I will not be delving into the chemistry in detail here, suffice it to say that he comes close to synthesizing a highly unstable explosive, the likes of which was not "discovered" for another two centuries. It is a striking illustration of how technical ability can be in place long before theory catches up, in this case thankfully so. 

The pigment he did succeed in making is for now a mystery. Manganese carbonate, which can form ruby red crystals might fit the bill, except that it decomposes at the temperatures of molten glass. It occurs in nature as the mineral rhodochrosite as seen above. [1] Below is Neri's recipe for "Transparent Red in Glass" from his 1612 book L’Arte Vetraria. Most of the terminology is straightforward, with the exception of a few terms. 'Porphyry' is a hard granite used for grinding stones. 'Reverberation' is indirect radiation in a furnace, where the heat is reflected from the walls. 'Sublimation' is when certain materials vaporize directly from a solid form and recondense without passing through a liquid phase.

Grind manganese impalpably, then mix it with an equal amount of refined saltpeter and put it into a clay pan set to the fire, reverberating and calcining it for 24 hours. Take it then and wash its saltiness away with warm common water. Once separated from the salt, let it dry. It will be a ruby-red color. With this, mix an equal weight of sal ammoniac and grind them together over porphyry stone with distilled vinegar, which they will soak up. Leave this alone to dry and then put it in a retort with a wide body and a long neck. Heat it in sand for 12 hours to sublimate. 

Then break up the glass. Take all the deposits in the neck and body of the retort and mix it with the residual remains in the bottom. Weigh it and combine it all with as much sal ammoniac as was lost in the first sublimation. Grind everything together over the porphyry stone, with distilled vinegar for it to soak up. Then put it in a retort to sublimate as above. Repeat this sublimation, in this manner, many times until in the end, the manganese will all remain fusible in the bottom. 

This is the medicine that tints crystal and pastes in a diaphanous red color and a ruby red as well. Use 20 oz of this medicine per ounce of cristallo or glass, but more or less may be used accordingly to govern the color. The manganese should be the very best from Piedmont, so that it will have the effect of tinting the glass a beautiful ruby color and be a sight of wonderment.

[1] Manganese carbonate, MnCO3.

Sal Ammoniac

Alchemical symbols used to denote sal ammoniac.

Today we will examine "sal ammoniac," a common alchemical ingredient used by Antonio Neri in many of his preparations. In its pure form, it is a colorless crystalline material and is known to chemists as ammonium chloride. It does occur as a (rare) natural mineral, but it was also manufactured as early as the thirteenth century, as noted by alchemist Albertus Magnus in his De alchymia.[1] Neither he nor Neri provides a recipe for sal ammoniac, but other sources indicate that it was made by allowing urine to putrefy with common salt. French investigators documented another method used in Egypt in the eighteenth century. This scheme involved burning the dung of animals who fed on spring grasses and then sublimating the ammoniac out of the resulting soot. Sublimation occurs when a heated material goes directly from a solid to a gaseous state without ever becoming liquid. Sal ammoniac has this property; when heated it turns to a gas and upon cooling, turns back to a solid.

Sal Ammoniac,
natural formation

The usefulness of sal ammoniac in alchemy stems from the fact that when dissolved in water, which it does easily, it immediately dissociates into equal parts of ammonia and hydrochloric acid, which in turn will dissolve some metals, including tin, zinc, iron and (reluctantly) lead. Its most famous use was as an additive to the stronger acid aqua fortis (nitric acid). Together the two formed aqua regis which was strong enough to dissolve gold. At the time that Neri was working, the only known way to dissolve the most 'noble' of metals (gold) was with the 'king' of acids (aqua regis). Neri puts this knowledge to use in his recipe for ruby-red colored glass made with pure gold. His description is light on details, but he does clearly direct the reader to dissolve the precious metal in aqua regis, then gently evaporate away the acid to obtain the red pigment.

Elsewhere in Neri's glassmaking book, L'Arte Vetraria,[2] he uses sal ammoniac in the production of "alemagna blue" paint and in the tinting of natural rock crystal. 

Another of Neri's creations requiring sal ammoniac was Chalcedony glass. It had swirls of every color the glassmaker could produce. He achieved this feat by making extensive use of aqua regis to dissolve each of a long list of metals. He then gently evaporated off the acid, leaving ultrafine powdered metals, which he added as pigments to the glass melt. 

With this powder, I made a chalcedony in a glass furnace in Antwerp that was then run by a most courteous gentleman; Mr. Filippo Gridolfi. This chalcedony gave rise to work so nice and graceful, that it emulated true oriental agate, and in beauty and delightful colors by far exceeded it.

Today, chemical factories produce vast quantities of the materials used by Neri in his glassmaking exploits and in far higher purities. Having unlimited quantities of every conceivable chemical compound at our fingertips makes it difficult to appreciate the physical labor involved by seventeenth century alchemists, both in the preparation of the glass and in the production of the individual ingredients. The chalcedony glass recipe cited above must have taken workers many, many hours to produce and must have cost a small fortune. 

[1] Magnus 1958.
[2] Neri 1612.
[3] Glauber and others used the term 'sal ammoniac' to describe a related chemical (NH4)2SO4. When mixed with aqua fortis this forms a nitric-sulfuric acid solution, which does not form aqua regis, and does not dissolve gold.
* This post first appeared here on 22 August 2014.

Sal Ammoniac

Ammoniac crystals, Fan-yagnobskoe coal mine, Tadjikistan,

Photo (c) A. A. Evseev.

Here we will examine "sal ammoniac," a common alchemical ingredient used by Antonio Neri in many of his early seventeenth century preparations. In its pure form, it is a colorless crystalline material and is known to chemists as ammonium chloride. It does occur as a (rare) natural mineral, but it was also manufactured as early as the thirteenth century, as noted by alchemist Albertus Magnus in his De alchymia.[1] Neither he nor Neri provides a recipe for sal ammoniac, but other sources indicate that it was made by allowing urine to putrefy with common salt. French investigators documented another method used in Egypt in the eighteenth century. This scheme involved burning the dung of animals who fed on spring grasses and then sublimating the ammoniac out of the resulting soot. Sublimation occurs when a heated material goes directly from a solid to a gaseous state without ever becoming liquid. Sal ammoniac has this property; when heated it turns to a gas and upon cooling, turns back to a solid.
The usefulness of sal ammoniac in alchemy stems from the fact that when dissolved in water, which it does easily, it immediately dissociates into equal parts of ammonia and hydrochloric acid, which in turn will dissolve some metals, including tin, zinc, iron and (reluctantly) lead. Its most famous use was as an additive to the stronger acid aqua fortis (nitric acid). Together the two formed aqua regis which was strong enough to dissolve gold. At the time that Neri was working, the only known way to dissolve the most 'noble' of metals (gold) was with the 'king' of acids (aqua regis). Neri puts this knowledge to use in his recipe for ruby-red colored glass made with pure gold. His description is light on details, but he does clearly direct the reader to dissolve the precious metal in aqua regis, then gently evaporate away the acid to obtain the red pigment.

Elsewhere in Neri's glassmaking book, L'Arte Vetraria,[2] he uses sal ammoniac in the production of "alemagna blue" paint and in the tinting of natural rock crystal. 

Another of Neri's creations requiring sal ammoniac was Chalcedony glass. It had swirls of every color the glassmaker could produce. He achieved this feat by making extensive use of aqua regis to dissolve a long list of metals. He then gently evaporated off the acid, leaving ultrafine powdered metals, which he added as pigments to the glass melt. 

With this powder, I made a chalcedony in a glass furnace in Antwerp that was then run by a most courteous gentleman; Mr. Filippo Gridolfi. This chalcedony gave rise to work so nice and graceful, that it emulated true oriental agate, and in beauty and delightful colors by far exceeded it.

Today, chemical factories produce vast quantities of the materials used by Neri in his glassmaking exploits and in far higher purities. Having unlimited quantities of every conceivable chemical compound at our fingertips makes it difficult to appreciate the physical labor involved by seventeenth century alchemists, both in the preparation of the glass and in the production of the individual ingredients. The chalcedony glass recipe cited above must have taken workers many, many hours to produce and must have cost a small fortune. 

[1] Magnus 1958.
[2] Neri 1612.
[3] Glauber and others used the term 'sal ammoniac' to describe a related chemical (NH4)2SO4. When mixed with aqua fortis this forms a nitric-sulfuric acid solution, which does not form aqua regis, and does not dissolve gold.

*This post first appeared here 22 August 2014.

Neri's other Rubino Glass

Rhodochrosite, from the Sweet Home Mine, Colorado.

Antonio Neri is widely recognized for publishing a recipe for the coveted and difficult gold ruby glass. "Rubino", as it is sometimes called, achieves a deep ruby red color utilizing only powdered metallic gold as a colorant. Perhaps because of the notoriety of that prescription, Neri’s other transparent red glass is hardly known. His recipe #120 describes a deep red pigment based on manganese. Today manganese takes its place on the periodic table as an elemental metal, but in the early seventeenth century it had not been isolated from its mineral ore. What Neri calls manganese was actually its oxide, which occurs as a black powdery material. Its effects in glass have been known since the early Egyptian dynasties and before that, as a pottery glaze. By itself the oxide produces a tint often likened to violet or amethyst. In small quantities, it is used to neutralize the slight green tint introduced by iron impurities in clear glass. 

To make his ruby red pigment, Neri starts with high quality manganese oxide from Piedmont and processes it through several alchemical operations. I will not be delving into the chemistry in detail here, but suffice it to say that he comes astoundingly close to synthesizing a highly unstable explosive, the likes of which was not "discovered" for another two centuries. It is a striking illustration of how technical ability can be in place long before theory catches up, in this case thankfully so. 

The pigment he did succeed in making is for now a mystery. Manganese carbonate, which can form ruby red crystals might fit the bill, except that it decomposes at the temperatures of molten glass. It occurs in nature as the mineral rhodochrosite as seen above. [1] Below is Neri's recipe for "Transparent Red in Glass" from his 1612 book L’Arte Vetraria. Most of the terminology is straightforward, with the exception of a few terms. 'Porphyry' is a hard granite used for grinding stones. 'Reverberation' is indirect radiation in a furnace, where the heat is reflected from the walls. 'Sublimation' is when certain materials vaporize directly from a solid form and recondense without passing through a liquid phase.

Grind manganese impalpably, then mix it with an equal amount of refined saltpeter and put it into a clay pan set to the fire, reverberating and calcining it for 24 hours. Take it then and wash its saltiness away with warm common water. Once separated from the salt, let it dry. It will be a ruby-red color. With this, mix an equal weight of sal ammoniac and grind them together over porphyry stone with distilled vinegar, which they will soak up. Leave this alone to dry and then put it in a retort with a wide body and a long neck. Heat it in sand for 12 hours to sublimate. 

Then break up the glass. Take all the deposits in the neck and body of the retort and mix it with the residual remains in the bottom. Weigh it and combine it all with as much sal ammoniac as was lost in the first sublimation. Grind everything together over the porphyry stone, with distilled vinegar for it to soak up. Then put it in a retort to sublimate as above. Repeat this sublimation, in this manner, many times until in the end, the manganese will all remain fusible in the bottom. 

This is the medicine that tints crystal and pastes in a diaphanous red color and a ruby red as well. Use 20 oz of this medicine per ounce of cristallo or glass, but more or less may be used accordingly to govern the color. The manganese should be the very best from Piedmont, so that it will have the effect of tinting the glass a beautiful ruby color and be a sight of wonderment.

[1] Manganese carbonate, MnCO3.

Sal Ammoniac

Alchemical symbols used to denote sal ammoniac.

Today we will examine "sal ammoniac," a common alchemical ingredient used by Antonio Neri in many of his preparations. In its pure form, it is a colorless crystalline material and is known to chemists as ammonium chloride. It does occur as a (rare) natural mineral, but it was also manufactured as early as the thirteenth century, as noted by alchemist Albertus Magnus in his De alchymia.[1] Neither he nor Neri provides a recipe for sal ammoniac, but other sources indicate that it was made by allowing urine to putrefy with common salt. French investigators documented another method used in Egypt in the eighteenth century. This scheme involved burning the dung of animals who fed on spring grasses and then sublimating the ammoniac out of the resulting soot. Sublimation occurs when a heated material goes directly from a solid to a gaseous state without ever becoming liquid. Sal ammoniac has this property; when heated it turns to a gas and upon cooling, turns back to a solid.

Sal Ammoniac,
natural formation

The usefulness of sal ammoniac in alchemy stems from the fact that when dissolved in water, which it does easily, it immediately dissociates into equal parts of ammonia and hydrochloric acid, which in turn will dissolve some metals, including tin, zinc, iron and (reluctantly) lead. Its most famous use was as an additive to the stronger acid aqua fortis (nitric acid). Together the two formed aqua regis which was strong enough to dissolve gold. At the time that Neri was working, the only known way to dissolve the most 'noble' of metals (gold) was with the 'king' of acids (aqua regis). Neri puts this knowledge to use in his recipe for ruby-red colored glass made with pure gold. His description is light on details, but he does clearly direct the reader to dissolve the precious metal in aqua regis, then gently evaporate away the acid to obtain the red pigment.

Elsewhere in Neri's glassmaking book, L'Arte Vetraria,[2] he uses sal ammoniac in the production of "alemagna blue" paint and in the tinting of natural rock crystal. 

Another of Neri's creations requiring sal ammoniac was Chalcedony glass. It had swirls of every color the glassmaker could produce. He achieved this feat by making extensive use of aqua regis to dissolve each of a long list of metals. He then gently evaporated off the acid, leaving ultrafine powdered metals, which he added as pigments to the glass melt. 

With this powder, I made a chalcedony in a glass furnace in Antwerp that was then run by a most courteous gentleman; Mr. Filippo Gridolfi. This chalcedony gave rise to work so nice and graceful, that it emulated true oriental agate, and in beauty and delightful colors by far exceeded it.

Today, chemical factories produce vast quantities of the materials used by Neri in his glassmaking exploits and in far higher purities. Having unlimited quantities of every conceivable chemical compound at our fingertips makes it difficult to appreciate the physical labor involved by seventeenth century alchemists, both in the preparation of the glass and in the production of the individual ingredients. The chalcedony glass recipe cited above must have taken workers many, many hours to produce and must have cost a small fortune. 

[1] Magnus 1958.
[2] Neri 1612.
[3] Glauber and others used the term 'sal ammoniac' to describe a related chemical (NH4)2SO4. When mixed with aqua fortis this forms a nitric-sulfuric acid solution, which does not form aqua regis, and does not dissolve gold.
* This post first appeared here on 22 August 2014.

Sal Ammoniac

Ammoniac crystals, Fan-yagnobskoe coal mine, Tadjikistan,
Photo (c) A. A. Evseev.

Here we will examine "sal ammoniac," a common alchemical ingredient used by Antonio Neri in many of his early seventeenth century preparations. In its pure form, it is a colorless crystalline material and is known to chemists as ammonium chloride. It does occur as a (rare) natural mineral, but it was also manufactured as early as the thirteenth century, as noted by alchemist Albertus Magnus in his De alchymia.[1] Neither he nor Neri provides a recipe for sal ammoniac, but other sources indicate that it was made by allowing urine to putrefy with common salt. French investigators documented another method used in Egypt in the eighteenth century. This scheme involved burning the dung of animals who fed on spring grasses and then sublimating the ammoniac out of the resulting soot. Sublimation occurs when a heated material goes directly from a solid to a gaseous state without ever becoming liquid. Sal ammoniac has this property; when heated it turns to a gas and upon cooling, turns back to a solid.
The usefulness of sal ammoniac in alchemy stems from the fact that when dissolved in water, which it does easily, it immediately dissociates into equal parts of ammonia and hydrochloric acid, which in turn will dissolve some metals, including tin, zinc, iron and (reluctantly) lead. Its most famous use was as an additive to the stronger acid aqua fortis (nitric acid). Together the two formed aqua regis which was strong enough to dissolve gold. At the time that Neri was working, the only known way to dissolve the most 'noble' of metals (gold) was with the 'king' of acids (aqua regis). Neri puts this knowledge to use in his recipe for ruby-red colored glass made with pure gold. His description is light on details, but he does clearly direct the reader to dissolve the precious metal in aqua regis, then gently evaporate away the acid to obtain the red pigment.

Elsewhere in Neri's glassmaking book, L'Arte Vetraria,[2] he uses sal ammoniac in the production of "alemagna blue" paint and in the tinting of natural rock crystal. 

Another of Neri's creations requiring sal ammoniac was Chalcedony glass. It had swirls of every color the glassmaker could produce. He achieved this feat by making extensive use of aqua regis to dissolve a long list of metals. He then gently evaporated off the acid, leaving ultrafine powdered metals, which he added as pigments to the glass melt. 

With this powder, I made a chalcedony in a glass furnace in Antwerp that was then run by a most courteous gentleman; Mr. Filippo Gridolfi. This chalcedony gave rise to work so nice and graceful, that it emulated true oriental agate, and in beauty and delightful colors by far exceeded it.

Today, chemical factories produce vast quantities of the materials used by Neri in his glassmaking exploits and in far higher purities. Having unlimited quantities of every conceivable chemical compound at our fingertips makes it difficult to appreciate the physical labor involved by seventeenth century alchemists, both in the preparation of the glass and in the production of the individual ingredients. The chalcedony glass recipe cited above must have taken workers many, many hours to produce and must have cost a small fortune. 

[1] Magnus 1958.
[2] Neri 1612.
[3] Glauber and others used the term 'sal ammoniac' to describe a related chemical (NH4)2SO4. When mixed with aqua fortis this forms a nitric-sulfuric acid solution, which does not form aqua regis, and does not dissolve gold.

*This post first appeared here 22 August 2014.

Neri's Other Rubino

Rhodochrosite, from the Sweet Home Mine, Colorado.

Antonio Neri is widely recognized for publishing a recipe for the coveted and difficult gold ruby glass. "Rubino" as it is sometimes called achieves a deep ruby red color utilizing only powdered metallic gold as a colorant. Perhaps because of the notoriety of that prescription, Neri’s other transparent red glass is hardly known. His recipe #120 describes a deep red pigment based on manganese. Today manganese takes its place on the periodic table as an elemental metal, but in the early seventeenth century it had not been isolated from its mineral ore. What Neri calls manganese was actually its oxide, which occurs as a black powdery material. Its effects in glass have been known since the early Egyptian dynasties and before that, as a pottery glaze. By itself the oxide produces a tint often likened to violet or amethyst. In small quantities, it is used to neutralize the slight green tint introduced by iron impurities in clear glass. 

To make his ruby red pigment, Neri starts with high quality manganese oxide from Piedmont and processes it through several alchemical operations. I will not be delving into the chemistry in detail here, but suffice it to say that he comes astoundingly close to synthesizing a highly unstable explosive, the likes of which was not "discovered" for another two centuries. It is a striking illustration of how technical ability can be in place long before theory catches up, in this case thankfully so. 

The pigment he did succeed in making is for now a mystery. Manganese carbonate, which can form ruby red crystals might fit the bill, except that it decomposes at the temperatures of molten glass. It occurs in nature as the mineral rhodochrosite as seen above. [1] Below is Neri's recipe for "Transparent Red in Glass" from his 1612 book L’Arte Vetraria. Most of the terminology is straightforward, with the exception of a few terms. 'Porphyry' is a hard granite used for grinding stones. 'Reverberation' is indirect radiation in a furnace, where the heat is reflected from the walls. 'Sublimation' is when certain materials vaporize directly from a solid form and recondense without passing through a liquid phase.

Grind manganese impalpably, then mix it with an equal amount of refined saltpeter and put it into a clay pan set to the fire, reverberating and calcining it for 24 hours. Take it then and wash its saltiness away with warm common water. Once separated from the salt, let it dry. It will be a ruby-red color. With this, mix an equal weight of sal ammoniac and grind them together over porphyry stone with distilled vinegar, which they will soak up. Leave this alone to dry and then put it in a retort with a wide body and a long neck. Heat it in sand for 12 hours to sublimate. 

Then break up the glass. Take all the deposits in the neck and body of the retort and mix it with the residual remains in the bottom. Weigh it and combine it all with as much sal ammoniac as was lost in the first sublimation. Grind everything together over the porphyry stone, with distilled vinegar for it to soak up. Then put it in a retort to sublimate as above. Repeat this sublimation, in this manner, many times until in the end, the manganese will all remain fusible in the bottom. 

This is the medicine that tints crystal and pastes in a diaphanous red color and a ruby red as well. Use 20 oz of this medicine per ounce of cristallo or glass, but more or less may be used accordingly to govern the color. The manganese should be the very best from Piedmont, so that it will have the effect of tinting the glass a beautiful ruby color and be a sight of wonderment.

[1] Manganese carbonate, MnCO3.

Sal Ammoniac

Alchemical symbols used to denote sal ammoniac.

Today we will examine "sal ammoniac," a common alchemical ingredient used by Antonio Neri in many of his preparations. In its pure form, it is a colorless crystalline material and is known to chemists as ammonium chloride. It does occur as a (rare) natural mineral, but it was also manufactured as early as the thirteenth century, as noted by alchemist Albertus Magnus in his De alchymia.[1] Neither he nor Neri provides a recipe for sal ammoniac, but other sources indicate that it was made by allowing urine to putrefy with common salt. French investigators documented another method used in Egypt in the eighteenth century. This scheme involved burning the dung of animals who fed on spring grasses and then sublimating the ammoniac out of the resulting soot. Sublimation occurs when a heated material goes directly from a solid to a gaseous state without ever becoming liquid. Sal ammoniac has this property; when heated it turns to a gas and upon cooling, turns back to a solid.

The usefulness of sal ammoniac in alchemy stems from the fact that when dissolved in water, which it does easily, it immediately dissociates into equal parts of ammonia and hydrochloric acid, which in turn will dissolve some metals, including tin, zinc, iron and (reluctantly) lead. Its most famous use was as an additive to the stronger acid aqua fortis (nitric acid). Together the two formed aqua regis which was strong enough to dissolve gold. At the time that Neri was working, the only known way to dissolve the most 'noble' of metals (gold) was with the 'king' of acids (aqua regis). Neri puts this knowledge to use in his recipe for ruby-red colored glass made with pure gold. His description is light on details, but he does clearly direct the reader to dissolve the precious metal in aqua regis, then gently evaporate away the acid to obtain the red pigment.

Elsewhere in Neri's glassmaking book, L'Arte Vetraria,[2] he uses sal ammoniac in the production of "alemagna blue" paint and in the tinting of natural rock crystal. 

Another of Neri's creations requiring sal ammoniac was Chalcedony glass. It had swirls of every color the glassmaker could produce. He achieved this feat by making extensive use of aqua regis to dissolve each of a long list of metals. He then gently evaporated off the acid, leaving ultrafine powdered metals, which he added as pigments to the glass melt. 

With this powder, I made a chalcedony in a glass furnace in Antwerp that was then run by a most courteous gentleman; Mr. Filippo Gridolfi. This chalcedony gave rise to work so nice and graceful, that it emulated true oriental agate, and in beauty and delightful colors by far exceeded it.

Today, chemical factories produce vast quantities of the materials used by Neri in his glassmaking exploits and in far higher purities. Having unlimited quantities of every conceivable chemical compound at our fingertips makes it difficult to appreciate the physical labor involved by seventeenth century alchemists, both in the preparation of the glass and in the production of the individual ingredients. The chalcedony glass recipe cited above must have taken workers many, many hours to produce and must have cost a small fortune. 

[1] Magnus 1958.
[2] Neri 1612.
[3] Glauber and others used the term 'sal ammoniac' to describe a related chemical (NH4)2SO4. When mixed with aqua fortis this forms a nitric-sulfuric acid solution, which does not form aqua regis, and does not dissolve gold.
* This post first appeared here on 22 August 2014.