Witches Brew of Glass

 

Glass pumpkin evocative of chalcedony glass

Courtesy of  Smithsonian Museum store.

In honor of Halloween, we will take a detailed look at chalcedony glass; this is one of, if not the most colorful types of glass ever made. In the seventeenth century, it was extremely dangerous for glassmakers and artists, containing a veritable “witch’s brew” of toxic materials. In his 1612 book, L’Arte Vetraria, glassmaker Antonio Neri presents three recipes of which he is clearly very proud. Each of the three is attended by a complex list of ingredients. He describes the end result this way:

It will be adorned with so many graceful and beautiful areas of undulations, and enhanced with the play of diverse, lively, flaming colors, that truly it will seem nature cannot attain so great a height or grand a prize. [1]

In the same passage, Neri explains the importance of purifying each ingredient and eliminating all contamination. In so doing, he provides a fascinating insight into the thinking of an alchemist. He writes:

There is no doubt that in this art, when the ingredients are well prepared, they permeate the glass with dazzling lively colors. Impurities will ordinarily impede the entry of the tinctures into the glass, and prevent their intimate unification. However, when you open the colors of the metals well, and separate them from their impurities and sediment, their beauty will always by far surpass those that are common and ordinarily made in the furnace. [2]

To Neri’s mind, the metals used as pigments must undergo a process of “opening.” Once this was done, each metal’s characteristic color or “tincture” was free to permeate the glass, provided it was free of impurities. Today we might say that by reducing each metal into an extremely fine powder, the individual atoms more easily disperse in the glass. Neri’s “opening” process usually involved dissolving a pure metal in an acid and then slowly evaporating the liquid, resulting in a fine powder. Most color arises because, once in the glass,  the metal atoms block some parts of the spectrum, but not others. The result is that each metal gives rise to its own hue and only because it is dispersed in the oxygen rich environment of the glass matrix. 

 The striking point here is how the alchemist’s model was a perfectly adequate description for the times, in the same way that the atomic model works for us. Unfortunately, there was less awareness of the negative health consequences in some of these preparations. The evaporation of powerful acids could (and can) certainly cause acute respiratory and tissue irritation. However there were far more insidious dangers lurking in Neri’s chalcedony recipes.

Ribbed vessel, chalcedony glass, 17th century, 

 Museo del Monastero di Santa Giulia, Brescia.

In his first prescription, he dissolves silver, mercury, cobalt, manganese, copper and iron. [3] Some of these have been prepared with sulfur which also ends up in the mix. He evaporates it to a powder and adds it to well seasoned, good quality clear glass along with pulverized chimney soot. He notes “When you stir [the molten glass] thoroughly it gives off a definite blue smoke.” Specifically hazardous in this recipe is the formation of mercury fumes, which are extremely toxic to breathe. 

He advises that in the furnace the glass appears “as red as fire,” but that “master craftsman always pinches off the glass for the job with nippers, and reheats it, in order to make waves, undulations and interplays of the most beautiful colors.” The reheating process is known to modern glassmakers as “striking,” a maneuver that brings out surprising color in some glass formulations. He suggests that this chalcedony can be used to form drinking glasses to more shapely cups, saltshakers, flower vases and similar vessels.

In his second and more sophisticated preparation Neri dissolves the materials in groups, in six separate flasks, only then combining them. He also adds new materials: lead, zinc, “blue painters enamel,” antimony and red varnish. The final recipe for chalcedony introduces new purification procedures and increases the number of separate flasks to nine. Additional ingredients include metal sulfides, ultramarine, tin, arsenic (read: death's calling card) and crimson paint. 

It is tempting to dismiss a few of these ingredients, like red varnish, or pulverized chimney soot; organic materials that would readily decompose in the heat of the furnace. However, Neri is known to have been a careful experimenter and these additions may well have had an effect on the melt, even if not in terms of color. Of the third recipe, which Neri developed in Antwerp, he wrote: 

Many Portuguese gentlemen in the practice of appraising jewels said that nature could do no better. This was the most beautiful chalcedony that I have ever made in my life. While it may be quite laborious and take a long time to produce, the result is fit for a king. I presented His Excellency, the Prince of Orange, with two vessels of this chalcedony, which delighted him greatly. [4]

[1] Neri 1612, p. 34.
[2] Ibid.
[3] Manganese and cobalt were unknown as distinct metals, but were used in their oxide forms, mined as minerals.
[4] Neri 1612, p. 48. The prince of orange was Philip William.
* This post first appeared here on 31 Oct 2014.

Fire, Brimstone and Glass

 

The Alchemical Symbol for Sulfur

Bright yellow elemental sulfur or “brimstone” as it was often called, occupied a central place in the cabinets of seventeenth century alchemists. Antonio Neri used it in many of his preparations and specifically in pigments for glass. When sulfur is heated with thin sheets or shavings of metal, foul smelling chemical reactions can take place that reduce the metal to a powdered compound and some of these turn out to be effective glass colorants. Neri’s 1612 book, L’Arte Vetraria, offers a variety of recipes, which specifically prepare iron and copper using sulfur to form pigments. In reality, the resultant chemicals were mixtures of oxides and sulfur compounds. Since these also chemically interact with each other in the glass melt, many different effects are possible. Modern glass artists sometimes specifically use both oxide and sulfide pigmented glass side by side in the same piece; a striking effect can be the spontaneous formation of a third color along the boundary. As Neri says in the closing line of his book:

Although I have placed here the way to make this powder with much clarity, do not presuppose that I have described a way to make something ordinary, but rather a true treasure of nature, and this for the delight of kind and curious spirits.[1]

Keep in mind that the thinking of alchemist Neri was that the sulfur acted upon the metal, but did not necessarily combine with it. From his point of view, the exposure resulted in the metal’s infusion with new properties. The Aristotelian conception of the world was that everything under the sun contained various amounts of four elemental essences: air, water, fire and earth. Sulfur was seen to be dominated by the latter two, ‘fire’ because it burned easily and ‘earth’ because it occurs as a solid.

In the sixteenth century, a Swiss physician named Paracelsus developed an extension of the four-element system. After his death, his writings enjoyed a new popularity among chemical experimenters in the period that Neri came of age. Since his teenage years, the work of Paracelsus was a strong influence on both Neri and separately on his benefactor, Florentine prince Don Antonio de’ Medici. According to Paracelsus, sulfur was one of a triad of “principles” consisting of salt, sulfur and mercury. These three had philosophical as well as physical interpretations attached to them. Besides other applications, like in medicine, the three physical materials figured prominently in efforts to transmute one metal into another. 

In fact, sulfur in particular played a starring role in a very convincing demonstration that purported to turn iron into copper. Mining operations often utilized water to clean or separate ore from tailings. Other times, water was used to keep dust down, or simply flowed naturally through underground springs. When sulfur-bearing earth is exposed to air and moisture, the result can be the formation of dilute sulfuric acid. This “vitriol” was an irritant to the eyes and skin, and very unpopular with the miners. However, in at least one location, it seemed to have a miraculous property. When this “vitriolated water” flowed out of the mine, it seemed to transform bits of iron into copper. [2]

Chemically, copper had already been dissolved in the acid, forming a copper sulfate solution. But sulfuric acid shows a preference for iron. When the copper solution flowed over iron tools, it took up the iron and dropped the copper, depositing it in a thin layer. The effect appeared to be a transmutation of iron into copper. Further testing and scrutiny confirmed that pure iron, when exposed to the mine fluids resulted in real copper. Neri for one was well aware that the vitriolated water might have arrived containing copper, as he explains in his manuscript Discorso. [3] But apparently, it did not occur to him that the water leaving the scene might have contained the iron. If he had made the connection, the observation would have advanced the understanding of both ion-exchange chemistry and the principal of conservation of matter; these were two ideas that would not be explored seriously for another hundred years.

Well into the eighteenth century, the mine at Smolnik, (now in Slovakia), was a highly touted tourist destination for chemical experimenters. [4] For some, it was considered among the strongest evidence that transmutation could and did take place in the natural world. I like this demonstration so much because it works the same way as a parlor trick; while we are so intently focused on the metal changing before our eyes, Mother Nature quietly slips the copper in with one hand and takes the iron away with the other, no one the wiser.


[1] Neri 1612, p.114.
[2] See this post for a more detailed description  http://www.conciatore.org/2014/01/turning-iron-into-copper.html
[3] Grazzini 2102.
[4] The effect had previously been described Georgius Agricola, in book 5 [9] of Nature Fossilium. See edition, transl. from the first Latin edition of 1546 by Mark Chance Bandy, Jean A. Bandy (New York: Mineralogical Society of America, 1955), p. 188.

*This post first appeared here on 7 November 2014.

Glass, Fire, and Brimstone

The Alchemical Symbol for Sulfur

Bright yellow elemental sulfur or “brimstone” as it was often called, occupied a central place in the cabinets of seventeenth century alchemists. Antonio Neri used it in many of his preparations and specifically in pigments for glass. When sulfur is heated with thin sheets or shavings of metal, foul smelling chemical reactions can take place that reduce the metal to a powdered compound and some of these turn out to be effective glass colorants. Neri’s 1612 book, L’Arte Vetraria, offers a variety of recipes, which specifically prepare iron and copper using sulfur to form pigments. In reality, the resultant chemicals were mixtures of oxides and sulfur compounds. Since these also chemically interact with each other in the glass melt, many different effects are possible. Modern glass artists sometimes specifically use both oxide and sulfide pigmented glass side by side in the same piece; a striking effect can be the spontaneous formation of a third color along the boundary. As Neri says in the closing line of his book:

Although I have placed here the way to make this powder with much clarity, do not presuppose that I have described a way to make something ordinary, but rather a true treasure of nature, and this for the delight of kind and curious spirits.[1]

Keep in mind that the thinking of alchemist Neri was that the sulfur acted upon the metal, but did not necessarily combine with it. From his point of view, the exposure resulted in the metal’s infusion with new properties. The Aristotelian conception of the world was that everything under the sun contained various amounts of four elemental essences: air, water, fire and earth. Sulfur was seen to be dominated by the latter two, ‘fire’ because it burned easily and ‘earth’ because it occurs as a solid.

In the sixteenth century, a Swiss physician named Paracelsus developed an extension of the four-element system. After his death, his writings enjoyed a new popularity among chemical experimenters in the period that Neri came of age. Since his teenage years, the work of Paracelsus was a strong influence on both Neri and separately on his benefactor, Florentine prince Don Antonio de’ Medici. According to Paracelsus, sulfur was one of a triad of “principles” consisting of salt, sulfur and mercury. These three had philosophical as well as physical interpretations attached to them. Besides other applications, like in medicine, the three physical materials figured prominently in efforts to transmute one metal into another. 

In fact, sulfur in particular played a starring role in a very convincing demonstration that purported to turn iron into copper. Mining operations often utilized water to clean or separate ore from tailings. Other times, water was used to keep dust down, or simply flowed naturally through underground springs. When sulfur-bearing earth is exposed to air and moisture, the result can be the formation of dilute sulfuric acid. This “vitriol” was an irritant to the eyes and skin, and very unpopular with the miners. However, in at least one location, it seemed to have a miraculous property. When this “vitriolated water” flowed out of the mine, it seemed to transform bits of iron into copper. [2]

Chemically, copper had already been dissolved in the acid, forming a copper sulfate solution. But sulfuric acid shows a preference for iron. When the copper solution flowed over iron tools, it took up the iron and dropped the copper, depositing it in a thin layer. The effect appeared to be a transmutation of iron into copper. Further testing and scrutiny confirmed that pure iron, when exposed to the mine fluids resulted in real copper. Neri for one was well aware that the vitriolated water might have arrived containing copper, as he explains in his manuscript Discorso. [3] But apparently, it did not occur to him that the water leaving the scene might have contained the iron. If he had made the connection, the observation would have advanced the understanding of both ion-exchange chemistry and the principal of conservation of matter; these were two ideas that would not be explored seriously for another hundred years.

Well into the eighteenth century, the mine at Smolnik, (now in Slovakia), was a highly touted tourist destination for chemical experimenters. [4] For some, it was considered among the strongest evidence that transmutation could and did take place in the natural world. I like this demonstration so much because it works the same way as a parlor trick; while we are so intently focused on the metal changing before our eyes, Mother Nature quietly slips the copper in with one hand and takes the iron away with the other, no one the wiser.


[1] Neri 1612, p.114.
[2] See this post for a more detailed description  http://www.conciatore.org/2014/01/turning-iron-into-copper.html
[3] Grazzini 2102.
[4] The effect had previously been described Georgius Agricola, in book 5 [9] of Nature Fossilium. See edition, transl. from the first Latin edition of 1546 by Mark Chance Bandy, Jean A. Bandy (New York: Mineralogical Society of America, 1955), p. 188.

*This post first appeared here on 7 November 2014.

Fire, Brimstone, and Glass

The Alchemical Symbol for Sulfur

Bright yellow elemental sulfur or “brimstone” as it was often called, occupied a central place in the cabinets of seventeenth century alchemists. Antonio Neri used it in many of his preparations and specifically in pigments for glass. When sulfur is heated with thin sheets or shavings of metal, foul smelling chemical reactions can take place that reduce the metal to a powdered compound and some of these turn out to be effective glass colorants. Neri’s 1612 book, L’Arte Vetraria, offers a variety of recipes, which specifically prepare iron and copper using sulfur to form pigments. In reality, the resultant chemicals were mixtures of oxides and sulfur compounds. Since these also chemically interact with each other in the glass melt, many different effects are possible. Modern glass artists sometimes specifically use both oxide and sulfide pigmented glass side by side in the same piece; a striking effect can be the spontaneous formation of a third color along the boundary. As Neri says in the closing line of his book:

Although I have placed here the way to make this powder with much clarity, do not presuppose that I have described a way to make something ordinary, but rather a true treasure of nature, and this for the delight of kind and curious spirits.[1]

Keep in mind that the thinking of alchemist Neri was that the sulfur acted upon the metal, but did not necessarily combine with it. From his point of view, the exposure resulted in the metal’s infusion with new properties. The Aristotelian conception of the world was that everything under the sun contained various amounts of four elemental essences: air, water, fire and earth. Sulfur was seen to be dominated by the latter two, ‘fire’ because it burned easily and ‘earth’ because it occurs as a solid.

In the sixteenth century, a Swiss physician named Paracelsus developed an extension of the four-element system. After his death, his writings enjoyed a new popularity among chemical experimenters in the period that Neri came of age. Since his teenage years, the work of Paracelsus was a strong influence on both Neri and separately on his benefactor, Florentine prince Don Antonio de’ Medici. According to Paracelsus, sulfur was one of a triad of “principles” consisting of salt, sulfur and mercury. These three had philosophical as well as physical interpretations attached to them. Besides other applications, like in medicine, the three physical materials figured prominently in efforts to transmute one metal into another. 

In fact, sulfur in particular played a starring role in a very convincing demonstration that purported to turn iron into copper. Mining operations often utilized water to clean or separate ore from tailings. Other times, water was used to keep dust down, or simply flowed naturally through underground springs. When sulfur-bearing earth is exposed to air and moisture, the result can be the formation of dilute sulfuric acid. This “vitriol” was an irritant to the eyes and skin, and very unpopular with the miners. However, in at least one location, it seemed to have a miraculous property. When this “vitriolated water” flowed out of the mine, it seemed to transform bits of iron into copper. [2]

Chemically, copper had already been dissolved in the acid, forming a copper sulfate solution. But sulfuric acid shows a preference for iron. When the copper solution flowed over iron tools, it took up the iron and dropped the copper, depositing it in a thin layer. The effect appeared to be a transmutation of iron into copper. Further testing and scrutiny confirmed that pure iron, when exposed to the mine fluids resulted in real copper. Neri for one was well aware that the vitriolated water might have arrived containing copper, as he explains in his manuscript Discorso. [3] But apparently, it did not occur to him that the water leaving the scene might have contained the iron. If he had made the connection, the observation would have advanced the understanding of both ion-exchange chemistry and the principal of conservation of matter; these were two ideas that would not be explored seriously for another hundred years.

Well into the eighteenth century, the mine at Smolnik, (now in Slovakia), was a highly touted tourist destination for chemical experimenters. [4] For some, it was considered among the strongest evidence that transmutation could and did take place in the natural world. I like this demonstration so much because it works the same way as a parlor trick; while we are so intently focused on the metal changing before our eyes, Mother Nature quietly slips the copper in with one hand and takes the iron away with the other, no one the wiser.


[1] Neri 1612, p.114.
[2] See this post for a more detailed description  http://www.conciatore.org/2014/01/turning-iron-into-copper.html
[3] Grazzini 2102.
[4] The effect had previously been described Georgius Agricola, in book 5 [9] of Nature Fossilium. See edition, transl. from the first Latin edition of 1546 by Mark Chance Bandy, Jean A. Bandy (New York: Mineralogical Society of America, 1955), p. 188.

*This post first appeared here on 7 November 2014.

Witch's Brew of Glass

Glass pumpkin evocative of chalcedony glass

Courtesy of  Smithsonian Museum store.

In honor of Halloween, we will take a detailed look at chalcedony glass; this is one of, if not the most colorful types of glass ever made. In the seventeenth century, it was extremely dangerous for glassmakers and artists, containing a veritable “witch’s brew” of toxic materials. In his 1612 book, L’Arte Vetraria, glassmaker Antonio Neri presents three recipes of which he is clearly very proud. Each of the three is attended by a complex list of ingredients. He describes the end result this way:

It will be adorned with so many graceful and beautiful areas of undulations, and enhanced with the play of diverse, lively, flaming colors, that truly it will seem nature cannot attain so great a height or grand a prize. [1]

In the same passage, Neri explains the importance of purifying each ingredient and eliminating all contamination. In so doing, he provides a fascinating insight into the thinking of an alchemist. He writes:

There is no doubt that in this art, when the ingredients are well prepared, they permeate the glass with dazzling lively colors. Impurities will ordinarily impede the entry of the tinctures into the glass, and prevent their intimate unification. However, when you open the colors of the metals well, and separate them from their impurities and sediment, their beauty will always by far surpass those that are common and ordinarily made in the furnace. [2]

To Neri’s mind, the metals used as pigments must undergo a process of “opening.” Once this was done, each metal’s characteristic color or “tincture” was free to permeate the glass, provided it was free of impurities. Today we might say that by reducing each metal into an extremely fine powder, the individual atoms more easily disperse in the glass. Neri’s “opening” process usually involved dissolving a pure metal in an acid and then slowly evaporating the liquid, resulting in a fine powder. Most color arises because, once in the glass,  the metal atoms block some parts of the spectrum, but not others. The result is that each metal gives rise to its own hue and only because it is dispersed in the oxygen rich environment of the glass matrix. 

 The striking point here is how the alchemist’s model was a perfectly adequate description for the times, in the same way that the atomic model works for us. Unfortunately, there was less awareness of the negative health consequences in some of these preparations. The evaporation of powerful acids could (and can) certainly cause acute respiratory and tissue irritation. However there were far more insidious dangers lurking in Neri’s chalcedony recipes.

Ribbed vessel, chalcedony glass, 17th century, 

 Museo del Monastero di Santa Giulia, Brescia.

In his first prescription, he dissolves silver, mercury, cobalt, manganese, copper and iron. [3] Some of these have been prepared with sulfur which also ends up in the mix. He evaporates it to a powder and adds it to well seasoned, good quality clear glass along with pulverized chimney soot. He notes “When you stir [the molten glass] thoroughly it gives off a definite blue smoke.” Specifically hazardous in this recipe is the formation of mercury fumes, which are extremely toxic to breathe. 

He advises that in the furnace the glass appears “as red as fire,” but that “master craftsman always pinches off the glass for the job with nippers, and reheats it, in order to make waves, undulations and interplays of the most beautiful colors.” The reheating process is known to modern glassmakers as “striking,” a maneuver that brings out surprising color in some glass formulations. He suggests that this chalcedony can be used to form drinking glasses to more shapely cups, saltshakers, flower vases and similar vessels.

In his second and more sophisticated preparation Neri dissolves the materials in groups, in six separate flasks, only then combining them. He also adds new materials: lead, zinc, “blue painters enamel,” antimony and red varnish. The final recipe for chalcedony introduces new purification procedures and increases the number of separate flasks to nine. Additional ingredients include metal sulfides, ultramarine, tin, arsenic (read: death's calling card) and crimson paint. 

It is tempting to dismiss a few of these ingredients, like red varnish, or pulverized chimney soot; organic materials that would readily decompose in the heat of the furnace. However, Neri is known to have been a careful experimenter and these additions may well have had an effect on the melt, even if not in terms of color. Of the third recipe, which Neri developed in Antwerp, he wrote: 

Many Portuguese gentlemen in the practice of appraising jewels said that nature could do no better. This was the most beautiful chalcedony that I have ever made in my life. While it may be quite laborious and take a long time to produce, the result is fit for a king. I presented His Excellency, the Prince of Orange, with two vessels of this chalcedony, which delighted him greatly. [4]

[1] Neri 1612, p. 34.
[2] Ibid.
[3] Manganese and cobalt were unknown as distinct metals, but were used in their oxide forms, mined as minerals.
[4] Neri 1612, p. 48. The prince of orange was Philip William.
* This post first appeared here on 31 Oct 2014.

Glass, Fire and Brimstone

The Alchemical Symbol for Sulfur

Bright yellow elemental sulfur or “brimstone” as it was often called, occupied a central place in the cabinets of seventeenth century alchemists. Antonio Neri used it in many of his preparations and specifically in pigments for glass. When sulfur is heated with thin sheets or shavings of metal, foul smelling chemical reactions can take place that reduce the metal to a powdered compound and some of these turn out to be effective glass colorants. Neri’s 1612 book, L’Arte Vetraria, offers a variety of recipes, which specifically prepare iron and copper using sulfur to form pigments. In reality, the resultant chemicals were mixtures of oxides and sulfur compounds. Since these also chemically interact with each other in the glass melt, many different effects are possible. Modern glass artists sometimes specifically use both oxide and sulfide pigmented glass side by side in the same piece; a striking effect can be the spontaneous formation of a third color along the boundary. As Neri says in the closing line of his book:

Although I have placed here the way to make this powder with much clarity, do not presuppose that I have described a way to make something ordinary, but rather a true treasure of nature, and this for the delight of kind and curious spirits.[1]

Keep in mind that the thinking of alchemist Neri was that the sulfur acted upon the metal, but did not necessarily combine with it. From his point of view, the exposure resulted in the metal’s infusion with new properties. The Aristotelian conception of the world was that everything under the sun contained various amounts of four elemental essences: air, water, fire and earth. Sulfur was seen to be dominated by the latter two, ‘fire’ because it burned easily and ‘earth’ because it occurs as a solid.

In the sixteenth century, a Swiss physician named Paracelsus developed an extension of the four-element system. After his death, his writings enjoyed a new popularity among chemical experimenters in the period that Neri came of age. Since his teenage years, the work of Paracelsus was a strong influence on both Neri and separately on his benefactor, Florentine prince Don Antonio de’ Medici. According to Paracelsus, sulfur was one of a triad of “principles” consisting of salt, sulfur and mercury. These three had philosophical as well as physical interpretations attached to them. Besides other applications, like in medicine, the three physical materials figured prominently in efforts to transmute one metal into another. 

In fact, sulfur in particular played a starring role in a very convincing demonstration that purported to turn iron into copper. Mining operations often utilized water to clean or separate ore from tailings. Other times, water was used to keep dust down, or simply flowed naturally through underground springs. When sulfur-bearing earth is exposed to air and moisture, the result can be the formation of dilute sulfuric acid. This “vitriol” was an irritant to the eyes and skin, and very unpopular with the miners. However, in at least one location, it seemed to have a miraculous property. When this “vitriolated water” flowed out of the mine, it seemed to transform bits of iron into copper. [2]

Chemically, copper had already been dissolved in the acid, forming a copper sulfate solution. But sulfuric acid shows a preference for iron. When the copper solution flowed over iron tools, it took up the iron and dropped the copper, depositing it in a thin layer. The effect appeared to be a transmutation of iron into copper. Further testing and scrutiny confirmed that pure iron, when exposed to the mine fluids resulted in real copper. Neri for one was well aware that the vitriolated water might have arrived containing copper, as he explains in his manuscript Discorso. [3] But apparently, it did not occur to him that the water leaving the scene might have contained the iron. If he had made the connection, the observation would have advanced the understanding of both ion-exchange chemistry and the principal of conservation of matter; these were two ideas that would not be explored seriously for another hundred years.

Well into the eighteenth century, the mine at Smolnik, (now in Slovakia), was a highly touted tourist destination for chemical experimenters. [4] For some, it was considered among the strongest evidence that transmutation could and did take place in the natural world. I like this demonstration so much because it works the same way as a parlor trick; while we are so intently focused on the metal changing before our eyes, Mother Nature quietly slips the copper in with one hand and takes the iron away with the other, no one the wiser.


[1] Neri 1612, p.114.
[2] See this post for a more detailed description  http://www.conciatore.org/2014/01/turning-iron-into-copper.html
[3] Grazzini 2102.
[4] The effect had previously been described Georgius Agricola, in book 5 [9] of Nature Fossilium. See edition, transl. from the first Latin edition of 1546 by Mark Chance Bandy, Jean A. Bandy (New York: Mineralogical Society of America, 1955), p. 188.

*This post first appeared here on 7 November 2014.

A Recipe for Transmutation

The recovery of copper from vitriolated waters,

from De Re Metallica, 1556, by Agricola (Georg Bauer).

In Discorso, one of the last manuscripts written by Antonio Neri just before his death, he reveals several transmutation recipes. One describes turning iron into copper; it is instructive because it uses common materials that we can identify and because the chemistry is now well understood.

"Take some iron sheets and lay them in vitriol water, being immersed in that, they will rust. Scrape off this rust, which will be a red powder, melt it in a crucible, and you will have perfect copper. The same effect can be had from various waters that are naturally vitriolated, because they flow through mines of vitriol, such as those of a source some distance from Leiden, and another below the fortress of Smolnik, [now in Slovakia].

Vitriol is an acidic sulfate dissolved in water, it could be made in the laboratory, but it also occurred naturally around mining operations where sulfurous minerals were present. Alchemists knew this solution as "oil of vitriol" and "spirit of vitriol." The mine that Neri references in Smolnik became famous for transmutation. As late as the eighteenth century, scientists and experimenters from around Europe made the pilgrimage to see the effect for themselves and tried to figure out what was happening. It may be a surprise to some readers, but following the above instructions will, in fact, produce copper just as Neri claimed. There is no deception or sleight of hand involved; the explanation is straightforward, but first, Neri treats us to a rare glimpse of his own reasoning on the subject:

"Some estimate and not without reason, that this experiment, being used to prove the transmutation of metals, is not suitable for this purpose. They say that the vitriolated waters become such because they are already heavy with the corrosive spirits of sulfur, having passed through the copper or iron mine, these waters corrode copper in the same way aqua fortis corrodes silver. So that really the substance of the copper remains in the water, which attacks the surface of the iron, which always remains iron. However, if that were true then the iron would not get consumed, or if it were consumed it would mix with the substance of the corroded copper in the water, and if it were fused, it would remain a mixture of iron and copper. And yet in this experiment, all the iron is consumed; it is reduced by the vitriolated water into powder, […] which in the fusion is still pure copper, so there should remain no doubt that this is a true transmutation.[1]

Given the state of chemistry at the time, Neri's reasoning is clear and rational. The iron disappears and a copper coating materializes in its place. What better evidence of transmutation could one ask for?

The key to what was actually happening is in the criticism leveled by skeptics. It turns out that they were on the right track, but neither they nor Neri had the full picture. Today, we understand it as a simple ion exchange reaction; blue vitriol water is a transparent saturated solution of copper sulfate (CuSO₄), in the presence of solid iron, the liquid dissolves the iron; copper from the vitriol is deposited in its place. The two metals, copper and iron, change places: the iron dissolves, forming green vitriol (FeSO₄) and copper is expelled from the solution. The result is a reduction in the amount of the iron, which is replaced by a proportional deposit of pure copper.

On a physical level, this chemical reaction is no different today than it was in the seventeenth century. What has changed is our interpretation of the experiment. What Neri viewed as a transformation of iron into copper, we now see as an exchange. There is, however, a deeper lesson in all this. As an alchemist, Antonio Neri was not being delusional or dishonest; he was careful, observant and applied his knowledge as best he could. This is no different from the way science works today. Both then and now, to be successful in unraveling nature’s secrets, one must become accustomed to a very uncomfortable situation: In the past, careful reasoning by brilliant thinkers has led to utterly wrong conclusions. The fact that much of our world is a mystery is unsettling; that the very process we use to understand it can be so flawed is harder to accept. Even more difficult is that the faculty we all rely on for survival—our own wits—can lead us so far astray.[2, 3]

[1] For more, see Discorso sopra la Chimica: The Paracelsian Philosophy of Antonio Neri”, M.G. Grazzini / Nuncius 27 (2012).
[2] This post first appeared here on 31 January 2014.
[3] For further reading,  see Pavol Rybár, Mário Molokáč, Ladislav Hvizdák, Jana Hvizdáková "Utilization of simple presentation methods for comparative studies in the historical mining" Geotourism 1–2 (40–41) 2015: 49–54.  http://journals.bg.agh.edu.pl/GEOTURYSTYKA/2015.40-41/geotour.2015.40-41.49.pdf

Fire and Brimstone

The Alchemical Symbol for Sulfur

Bright yellow elemental sulfur or “brimstone” as it was often called, occupied a central place in the cabinets of seventeenth century alchemists. Antonio Neri used it in many of his preparations and specifically in pigments for glass. When sulfur is heated with thin sheets or shavings of metal, foul smelling chemical reactions can take place that reduce the metal to a powdered compound and some of these turn out to be effective glass colorants. Neri’s 1612 book, L’Arte Vetraria, offers a variety of recipes, which specifically prepare iron and copper using sulfur to form pigments. In reality, the resultant chemicals were mixtures of oxides and sulfur compounds. Since these also chemically interact with each other in the glass melt, many different effects are possible. Modern glass artists sometimes specifically use both oxide and sulfide pigmented glass side by side in the same piece; a striking effect can be the spontaneous formation of a third color along the boundary. As Neri says in the closing line of his book:

Although I have placed here the way to make this powder with much clarity, do not presuppose that I have described a way to make something ordinary, but rather a true treasure of nature, and this for the delight of kind and curious spirits.[1]

Keep in mind that the thinking of alchemist Neri was that the sulfur acted upon the metal, but did not necessarily combine with it. From his point of view, the exposure resulted in the metal’s infusion with new properties. The Aristotelian conception of the world was that everything under the sun contained various amounts of four elemental essences: air, water, fire and earth. Sulfur was seen to be dominated by the latter two, ‘fire’ because it burned easily and ‘earth’ because it occurs as a solid.

In the sixteenth century, a Swiss physician named Paracelsus developed an extension of the four-element system. After his death, his writings enjoyed a new popularity among chemical experimenters in the period that Neri came of age. Since his teenage years, the work of Paracelsus was a strong influence on both Neri and separately on his benefactor, Florentine prince Don Antonio de’ Medici. According to Paracelsus, sulfur was one of a triad of “principles” consisting of salt, sulfur and mercury. These three had philosophical as well as physical interpretations attached to them. Besides other applications, like in medicine, the three physical materials figured prominently in efforts to transmute one metal into another. 

In fact, sulfur in particular played a starring role in a very convincing demonstration that purported to turn iron into copper. Mining operations often utilized water to clean or separate ore from tailings. Other times, water was used to keep dust down, or simply flowed naturally through underground springs. When sulfur-bearing earth is exposed to air and moisture, the result can be the formation of dilute sulfuric acid. This “vitriol” was an irritant to the eyes and skin, and very unpopular with the miners. However, in at least one location, it seemed to have a miraculous property. When this “vitriolated water” flowed out of the mine, it seemed to transform bits of iron into copper. [2]

Chemically, copper had already been dissolved in the acid, forming a copper sulfate solution. But sulfuric acid shows a preference for iron. When the copper solution flowed over iron tools, it took up the iron and dropped the copper, depositing it in a thin layer. The effect appeared to be a transmutation of iron into copper. Further testing and scrutiny confirmed that pure iron, when exposed to the mine fluids resulted in real copper. Neri for one was well aware that the vitriolated water might have arrived containing copper, as he explains in his manuscript Discorso. [3] But apparently, it did not occur to him that the water leaving the scene might have contained the iron. If he had made the connection, the observation would have advanced the understanding of both ion-exchange chemistry and the principal of conservation of matter; these were two ideas that would not be explored seriously for another hundred years.

Well into the eighteenth century, the mine at Smolnik, (now in Slovakia), was a highly touted tourist destination for chemical experimenters. [4] For some, it was considered among the strongest evidence that transmutation could and did take place in the natural world. I like this demonstration so much because it works the same way as a parlor trick; while we are so intently focused on the metal changing before our eyes, Mother Nature quietly slips the copper in with one hand and takes the iron away with the other, no one the wiser.


[1] Neri 1612, p.114.
[2] See this post for a more detailed description  http://www.conciatore.org/2014/01/turning-iron-into-copper.html
[3] Grazzini 2102.
[4] The effect had previously been described Georgius Agricola, in book 5 [9] of Nature Fossilium. See edition, transl. from the first Latin edition of 1546 by Mark Chance Bandy, Jean A. Bandy (New York: Mineralogical Society of America, 1955), p. 188.

*This post first appeared here on 7 November 2014.

Decolorizing Glass

The green tint from iron contamination

is neutralized by magenta from manganese.

For Antonio Neri and his contemporary glassmakers, contaminants, especially metallic contaminants were the bane of producing a crystal clear product. Great care was taken to ensure the purity of each ingredient at each step of the glass making process. The greatest threat of all was iron. Even small amounts will impart a green tint and for Renaissance era glassmakers, nemesis iron was everywhere. It is a common impurity in quartz, the main ingredient of glass, showing up as yellow "rust stains" both in sand and stones. It turned up in the plant salts used for glass flux as a trace-element and finally it was in the tools. Iron was in the mortars and pestles, in the pots and kettles, in the frit rakes, in the ladles, the stirring rods and in the blowpipes. A mistake at any step could easily tint the batch, even at the final stages. Neri admonishes glass workers:

Make sure never to return the neck, where the rod attaches to the glass, into the crucible of cristallo, because there are always remains of the iron that will cause it to become dark ... 

Centuries before Neri, it was discovered that the antidote to iron contaminated glass was manganese or more specifically manganese oxide, a mineral mined throughout Italy. However, Neri cautions: 

… you must always use manganese of Piedmont the way it is made for Murano, because the manganese of Tuscany and Liguria has more rust, which always make the melt dark. 

This color correction technique was known as early as the late 14th century and by Neri’s time it was a widely practiced technique in the glassmaker’s toolbox. Manganese oxide was known as a pigment in antiquity; the Magnesia region in Thessaly, central Greece was an ancient source for the black mineral. Around the year 1450, a clear crystal-like glass suitable for working into thin elaborate forms was developed in Venice. The glass was called cristallo and Murano glassmaker Angelo Barovier is often given credit. He may well be responsible for bringing together several existing techniques—manganese color correction among them — but these techniques individually were all available and utilized by glassmakers at least fifty years earlier. Barovier’s innovation would become a tradition giving Murano the reputation for the finest glass made anywhere, carried on by countless glassmakers and ultimately by our Florentine priest more than a century and a half later.

Removing the green tint of iron contamination with manganese is a clever trick. The manganese imparts a magenta tint to glass. As the complementary color to green, it effectively "cancels out" the green tint. The trade-off is that the glass is slightly darkened, even if appearing as a neutral color to the eye. When light passes through glass tinted by iron, green light is unaffected, which is why it appears green. The other colors that make up white light, notably red and violet are dampened. In effect, the green is enhanced. Now, adding manganese to the glass dampens only green light and brings the spectrum back into closer balance. The overall effect is that all the colors of light are slightly dampened, but by the same amount. In Neri's case, minor contamination from iron would produce only a small green tinge and the problem was corrected with a small dose of manganese. The resulting grey would hardly be noticed, especially in the thin, delicate pieces so popular at the time. To the eye of all but the most experienced expert, this decolorized glass had perfect crystal clarity.

Decolorization of glass is an example of a technique that was developed through experimentation without a deep understanding of the physics involved. Theories of light and color and the way they are perceived by the human eye came much later. In fact, manganese itself was not isolated as a metal until 1774, yet it was used skillfully by glass artisans three or four hundred years earlier. 

This post first appeared here in a slightly shorter form as 'Manganese of Piedmont' on 14 October 2013.

A Recipe for Transmutation

The recovery of copper from vitriolated waters,

from De Re Metallica, 1556, by Agricola (Georg Bauer).

In Discorso, one of the last manuscripts written by Antonio Neri before his death, he reveals several transmutation recipes. One describes turning iron into copper; it is instructive because it uses common materials that we can identify and because the chemistry is now well understood.

Take some iron sheets and lay them in vitriol water, being immersed in that, they will rust. Scrape off this rust, which will be a red powder, melt it in a crucible, and you will have perfect copper. The same effect can be had from various waters that are naturally vitriolated, because they flow through mines of vitriol, such as those of a source some distance from Leiden, and another below the fortress of Smolnik, [now in Slovakia].

Vitriol is an acidic sulfate dissolved in water, it could be made in the laboratory, but it also occurred naturally around mining operations where sulfurous minerals were present. Alchemists knew this solution as "oil of vitriol" and "spirit of vitriol." The mine that Neri references in Smolnik became famous for transmutation. As late as the eighteenth century, scientists and experimenters from around Europe made the pilgrimage to see the effect for themselves and tried to figure out what was happening. It may be a surprise to some readers, but following the above instructions will, in fact, produce copper just as Neri claimed. There is no deception or sleight of hand involved; the explanation is straightforward, but first, Neri treats us to a rare glimpse of his own reasoning on the subject:

Some estimate and not without reason, that this experiment, being used to prove the transmutation of metals, is not suitable for this purpose. They say that the vitriolated waters become such because they are already heavy with the corrosive spirits of sulfur, having passed through the copper or iron mine, these waters corrode copper in the same way aqua fortis corrodes silver. So that really the substance of the copper remains in the water, which attacks the surface of the iron, which always remains iron. However, if that were true then the iron would not get consumed, or if it were consumed it would mix with the substance of the corroded copper in the water, and if it were fused, it would remain a mixture of iron and copper. And yet in this experiment, all the iron is consumed; it is reduced by the vitriolated water into powder, […] which in the fusion is still pure copper, so there should remain no doubt that this is a true transmutation.[1]

Given the state of chemistry at the time, Neri's reasoning is clear and rational. The iron disappears and a copper coating materializes in its place. What better evidence of transmutation could one ask for?

The key to what was actually happening is in the criticism leveled by skeptics. It turns out that they were on the right track, but neither they nor Neri had the full picture. Today, we understand it as a simple ion exchange reaction; blue vitriol water is a transparent saturated solution of copper sulfate (CuSO₄), in the presence of solid iron, the liquid dissolves the iron; copper from the vitriol is deposited in its place. The two metals, copper and iron, change places: the iron dissolves, forming green vitriol (FeSO₄) and copper is expelled from the solution. The result is a reduction in the amount of the iron, which is replaced by a proportional deposit of pure copper.

On a physical level, this chemical reaction is no different today than it was in the seventeenth century. What has changed is our interpretation of the experiment. What Neri viewed as a transformation of iron into copper, we now see as an exchange. There is, however, a deeper lesson in all this. As an alchemist, Antonio Neri was not being delusional or dishonest; he was careful, observant and applied his knowledge as best he could. This is no different from the way science works today. Both then and now, to be successful in unraveling nature’s secrets, one must become accustomed to a very uncomfortable situation: In the past, careful reasoning by brilliant thinkers has led to utterly wrong conclusions. The fact that much of our world is a mystery is unsettling; that the very process we use to understand it can be so flawed is harder to accept. Even more difficult is that the faculty we all rely on for survival—our own wits—can lead us so far astray.[2, 3]

[1] For more, see Discorso sopra la Chimica: The Paracelsian Philosophy of Antonio Neri”, M.G. Grazzini / Nuncius 27 (2012).
[2] This post first appeared here on 31 January 2014.
[3] For further reading,  see Pavol Rybár, Mário Molokáč, Ladislav Hvizdák, Jana Hvizdáková "Utilization of simple presentation methods for comparative studies in the historical mining" Geotourism 1–2 (40–41) 2015: 49–54.  http://journals.bg.agh.edu.pl/GEOTURYSTYKA/2015.40-41/geotour.2015.40-41.49.pdf

Fire and Brimstone

The Alchemical Symbol for Sulfur

Bright yellow elemental sulfur or “brimstone” as it was often called, occupied a central place in the cabinets of seventeenth century alchemists. Antonio Neri used it in many of his preparations and specifically in pigments for glass. When sulfur is heated with thin sheets or shavings of metal, foul smelling chemical reactions can take place that reduce the metal to a powdered compound and some of these turn out to be effective glass colorants. Neri’s 1612 book, L’Arte Vetraria, offers a variety of recipes, which specifically prepare iron and copper using sulfur to form pigments. In reality, the resultant chemicals were mixtures of oxides and sulfur compounds. Since these also chemically interact with each other in the glass melt, many different effects are possible. Modern glass artists sometimes specifically use both oxide and sulfide pigmented glass side by side in the same piece; a striking effect can be the spontaneous formation of a third color along the boundary. As Neri says in the closing line of his book:

Although I have placed here the way to make this powder with much clarity, do not presuppose that I have described a way to make something ordinary, but rather a true treasure of nature, and this for the delight of kind and curious spirits.[1]

Keep in mind that the thinking of alchemist Neri was that the sulfur acted upon the metal, but did not necessarily combine with it. From his point of view, the exposure resulted in the metal’s infusion with new properties. The Aristotelian conception of the world was that everything under the sun contained various amounts of four elemental essences: air, water, fire and earth. Sulfur was seen to be dominated by the latter two, ‘fire’ because it burned easily and ‘earth’ because it occurs as a solid.

In the sixteenth century, a Swiss physician named Paracelsus developed an extension of the four-element system. After his death, his writings enjoyed a new popularity among chemical experimenters in the period that Neri came of age. Since his teenage years, the work of Paracelsus was a strong influence on both Neri and separately on his benefactor, Florentine prince Don Antonio de’ Medici. According to Paracelsus, sulfur was one of a triad of “principles” consisting of salt, sulfur and mercury. These three had philosophical as well as physical interpretations attached to them. Besides other applications, like in medicine, the three physical materials figured prominently in efforts to transmute one metal into another. 

In fact, sulfur in particular played a starring role in a very convincing demonstration that purported to turn iron into copper. Mining operations often utilized water to clean or separate ore from tailings. Other times, water was used to keep dust down, or simply flowed naturally through underground springs. When sulfur-bearing earth is exposed to air and moisture, the result can be the formation of dilute sulfuric acid. This “vitriol” was an irritant to the eyes and skin, and very unpopular with the miners. However, in at least one location, it seemed to have a miraculous property. When this “vitriolated water” flowed out of the mine, it seemed to transform bits of iron into copper. [2]

Chemically, copper had already been dissolved in the acid, forming a copper sulfate solution. But sulfuric acid shows a preference for iron. When the copper solution flowed over iron tools, it took up the iron and dropped the copper, depositing it in a thin layer. The effect appeared to be a transmutation of iron into copper. Further testing and scrutiny confirmed that pure iron, when exposed to the mine fluids resulted in real copper. Neri for one was well aware that the vitriolated water might have arrived containing copper, as he explains in his manuscript Discorso. [3] But apparently, it did not occur to him that the water leaving the scene might have contained the iron. If he had made the connection, the observation would have advanced the understanding of both ion-exchange chemistry and the principal of conservation of matter; these were two ideas that would not be explored seriously for another hundred years.

Well into the eighteenth century, the mine at Smolnik, (now in Slovakia), was a highly touted tourist destination for chemical experimenters. [4] For some, it was considered among the strongest evidence that transmutation could and did take place in the natural world. I like this demonstration so much because it works the same way as a parlor trick; while we are so intently focused on the metal changing before our eyes, Mother Nature quietly slips the copper in with one hand and takes the iron away with the other, no one the wiser.


[1] Neri 1612, p.114.
[2] See this post for a more detailed description  http://www.conciatore.org/2014/01/turning-iron-into-copper.html
[3] Grazzini 2102.
[4] The effect had previously been described Georgius Agricola, in book 5 [9] of Nature Fossilium. See edition, transl. from the first Latin edition of 1546 by Mark Chance Bandy, Jean A. Bandy (New York: Mineralogical Society of America, 1955), p. 188.

*This post first appeared here on 7 November 2014.

Decolorizing Glass

The green tint from iron contamination

is neutralized by magenta from manganese.

For Antonio Neri and his contemporary glassmakers, contaminants, especially metallic contaminants were the bane of producing a crystal clear product. Great care was taken to ensure the purity of each ingredient at each step of the glass making process. The greatest threat of all was iron. Even small amounts will impart a green tint and for Renaissance era glassmakers, nemesis iron was everywhere. It is a common impurity in quartz, the main ingredient of glass, showing up as yellow "rust stains" both in sand and stones. It turned up in the plant salts used for glass flux as a trace-element and finally it was in the tools. Iron was in the mortars and pestles, in the pots and kettles, in the frit rakes, in the ladles, the stirring rods and in the blowpipes. A mistake at any step could easily tint the batch, even at the final stages. Neri admonishes glass workers:

Make sure never to return the neck, where the rod attaches to the glass, into the crucible of cristallo, because there are always remains of the iron that will cause it to become dark ... 

Centuries before Neri, it was discovered that the antidote to iron contaminated glass was manganese or more specifically manganese oxide, a mineral mined throughout Italy. However, Neri cautions: 

… you must always use manganese of Piedmont the way it is made for Murano, because the manganese of Tuscany and Liguria has more rust, which always make the melt dark. 

This color correction technique was known as early as the late 14th century and by Neri’s time it was a widely practiced technique in the glassmaker’s toolbox. Manganese oxide was known as a pigment in antiquity; the Magnesia region in Thessaly, central Greece was an ancient source for the black mineral. Around the year 1450, a clear crystal-like glass suitable for working into thin elaborate forms was developed in Venice. The glass was called cristallo and Murano glassmaker Angelo Barovier is often given credit. He may well be responsible for bringing together several existing techniques—manganese color correction among them — but these techniques individually were all available and utilized by glassmakers at least fifty years earlier. Barovier’s innovation would become a tradition giving Murano the reputation for the finest glass made anywhere, carried on by countless glassmakers and ultimately by our Florentine priest more than a century and a half later.

Removing the green tint of iron contamination with manganese is a clever trick. The manganese imparts a magenta tint to glass. As the complementary color to green, it effectively "cancels out" the green tint. The trade-off is that the glass is slightly darkened, even if appearing as a neutral color to the eye. When light passes through glass tinted by iron, green light is unaffected, which is why it appears green. The other colors that make up white light, notably red and violet are dampened. In effect, the green is enhanced. Now, adding manganese to the glass dampens only green light and brings the spectrum back into closer balance. The overall effect is that all the colors of light are slightly dampened, but by the same amount. In Neri's case, minor contamination from iron would produce only a small green tinge and the problem was corrected with a small dose of manganese. The resulting grey would hardly be noticed, especially in the thin, delicate pieces so popular at the time. To the eye of all but the most experienced expert, this decolorized glass had perfect crystal clarity.

Decolorization of glass is an example of a technique that was developed through experimentation without a deep understanding of the physics involved. Theories of light and color and the way they are perceived by the human eye came much later. In fact, manganese itself was not isolated as a metal until 1774, yet it was used skillfully by glass artisans three or four hundred years earlier. 

This post first appeared here in a slightly shorter form as 'Manganese of Piedmont' on 14 October 2013.